500+ Five-Star Ratings on the Sprinkler-Guard
Veteran-Owned & Made in the USA
🚚 Free Shipping on Orders Over $100
🛡️ Patented Sprinkler Head Protection
⏱️ Installs in 30 Seconds — No Tools Required
500+ Five-Star Ratings on the Sprinkler-Guard
🚚 Free Shipping on Orders Over $100
🛡️ Patented Sprinkler Head Protection
⏱️ Installs in 30 Seconds — No Tools Required
This snap-on cover seals over your Sprinkler-Guard to keep snow, ice, sand, and grit out of the sprinkler head. By blocking debris while the system is not running, it helps prevent grinding, premature wear, and off-season failures, so your system starts up clean when you turn it back on.
Make sure your Sprinkler-Guard is already installed around the sprinkler head.
Press the cover down over the Sprinkler-Guard until the exterior tabs seat and the seal holds.
Keep the cover on during the off-season, freezing weather, dusty stretches, or whenever your system is not in use. Remove it when you are ready to run your sprinklers again.
Free shipping on orders over $100 (excludes Alaska & Hawaii). Most orders ship within 1-2 business days.
The Sprinkler-Guard system has earned over 500 five-star ratings from homeowners. The Cover is the latest addition to it.
Homeowners across the Sun Belt already trust the Sprinkler-Guard to protect their heads. The Cover is the newest part of that system.
The SG Covers were tested in temperatures ranging from below freezing to intense heat, and we made engineered design changes to ensure the seal stays tight as the material contracts and expands with the Sprinkler-Guard 3″ unit.
Designed and built in Florida by a Veteran-Owned company.
Cap your heads before the cold or the dust rolls in. No tools, no hassle.
Press the cover down over the Sprinkler-Guard until the exterior tabs seat and the seal holds.
Snow, ice, sand, and grit stay out of the head. Pop the cover off when you’re ready to run the system again.
Keeps snow, hail, and ice out of your heads through the cold months.
Keeps abrasive sand and grit out so your heads don’t grind down and fail. A big deal in dry, dusty regions.
No tools. It snaps right onto your Sprinkler-Guard and pops off just as easily.
Over a year of testing and mold work to get the seal right. Veteran-owned.
It snaps over your Sprinkler-Guard and seals the sprinkler head off from the weather when the system isn’t running. That keeps snow, ice, hail, sand, and grit out, so the head doesn’t grind down or get gummed up.
The cover is designed to snap onto an installed Sprinkler-Guard unit, so it works as part of the system. If you don’t have your guards in yet, put those in first and add the covers on top.
That was the hard part. It was tested from below freezing to intense heat, and re-engineered so the seal holds whether the material contracts or expands with the temperature.
Use these when your irrigation system isn’t running, especially in the fall after you drain your system.
When you’re ready to run the sprinklers again, just pop them off.
One cover per sprinkler head you want to protect. Match it to the number of Sprinkler-Guards you’ve got in the ground.
The Cover is sized for the 3-inch Sprinkler-Guard.
